There’s something almost regal about seeing a black Rolls-Royce glide into our shop at August Precision Auto Detailing. With its towering grille and unmistakable Spirit of Ecstasy, this car demands perfection—but it arrived dull, hazy, and littered with swirl marks and fine scratches.
This is where our expert paint correction service comes in. What follows is a deep dive into how we restored the mirror-like gloss of this luxury machine—and why true paint correction is more than just “a quick polish.”
What Is Paint Correction, Really?
Paint correction is the precise, multi-stage process of removing surface imperfections from a vehicle’s clear coat. These imperfections—swirls, scratches, oxidation, and water spots—scatter light and rob paint of its shine. Rather than masking them with waxes or fillers, we permanently remove them using machine polishing and professional-grade compounds.
At August Precision, we correct paint to optical clarity—not just for looks, but to protect your investment and deliver lasting results.
Why Rolls-Royce Paint Demands Expertise
Rolls-Royce finishes are renowned for their exceptional thickness and depth. These multi-layered systems often contain multiple base coats, mid-coats, and clear coats—some up to 500 microns thick in custom configurations.
That thickness gives us room to refine—but it also requires extreme care. Improper techniques can cause irreversible damage, especially around body lines or edges. Our certified technicians measure and log paint thickness on every panel before touching a polisher. No guesswork. Just precision.
Step-by-Step: Correcting the Rolls-Royce Finish
Here’s how we brought this stunning Rolls-Royce back to showroom quality:
1. Multi-Stage Decontamination
We started with a foam pre-soak, followed by a hand wash using pH-neutral shampoo. Then we applied an iron remover to pull embedded particles from the pores of the paint, and finally used a clay bar to lift surface contaminants.
2. Inspection & Paint Readings
Using high-intensity LED lighting and a paint thickness gauge, we documented every panel and mapped out areas that needed heavier correction versus light polishing.
3. Test Spot Correction
Before polishing the entire car, we tested multiple pad and compound combinations on a small section to find the safest, most effective approach. For this vehicle, we settled on a two-step process.
4. Heavy Cut Stage
Using a microfiber cutting pad and diminishing-abrasive compound, we removed deeper swirls, light scratches, and oxidation. This cut stage leveled the paint while maintaining safe heat levels.
5. Refinement Polish
A softer foam pad paired with an ultra-fine polish brought out a flawless gloss. This stage “jewels” the paint, removing micro-marring and creating a deep, wet-looking finish.
6. IPA Wipedown
To ensure we’re seeing true correction—not the effects of oils or fillers—we performed multiple isopropyl alcohol (IPA) wipe-downs between stages.
Professional Ceramic Coating Application
Once the paint was corrected, we protected the finish with one of our flagship ceramic coatings.
Unlike wax or sealants that sit on top of the paint, our coatings chemically bond with the surface to create a semi-permanent layer of protection. This enhances gloss, repels water, and protects against UV rays, chemical stains, and environmental fallout.
At August Precision, all ceramic coatings are installed by certified professionals using premium-grade products. With proper maintenance, the coating will last years—not weeks—giving this Rolls-Royce unmatched gloss and easy-clean performance.
Paint Protection Film for High-Wear Zones
To go one step further, we applied Paint Protection Film (PPF) to high-impact areas like the front bumper, hood edge, and side mirrors. This clear urethane film is self-healing, meaning light scratches disappear with heat from the sun or a warm garage.
Combining PPF with ceramic coating delivers ultimate defense: rock chip protection on the most vulnerable surfaces, and long-lasting hydrophobicity across the entire vehicle.
Final Results: A Mirror on Wheels
After over 20 hours of meticulous work, the Rolls-Royce left our detailing studio looking even better than the day it rolled off the assembly line. Under direct lighting, the panels reflected with glass-like clarity. No haze, no holograms—just liquid black perfection.
Before leaving, the owner received care instructions and a scheduled follow-up to inspect coating performance. At August Precision, we don’t just polish and walk away. We stand behind our craftsmanship and support every customer long after the service is complete.
Trust August Precision for Luxury Detailing
Paint correction is an art form—especially on ultra-luxury vehicles like Rolls-Royce. It requires the right tools, the right products, and above all, the right experience.
If your vehicle deserves the highest level of finish and protection, trust August Precision Auto Detailing. We serve Raleigh, NC and surrounding areas with ceramic coatings, paint correction, and PPF that meet the highest industry standards.
